Surface Preparation
|
N/A
All work surfaces should be clean, dry, and free of dirt, dust, debris, oils, loose and/or embedded gravel, un-adhered coatings, deteriorated membrane and other contaminants that may result in a surface that is not sound or is uneven.
|
Safety
|
N/A
Prior to working with this or any product consult product label and Material Safety Data Sheet (MSDS) for necessary health and safety precautions.
|
Limitations
|
N/A
- Do not apply to wet or damp surfaces.
- Not intended for insulation attachment.
|
Color
|
N/A
Black
|
Cartridge Size
|
N/A
1.5 Liter
|
Cartridges/Case
|
N/A
4
|
Storage
|
N/A
Keep temperature of contents between 65 °F-85 °F (18 °C-29 °C) 24 hours prior to use. Do not store in direct sunlight or temperatures higher than 90 °F (32 °C).
|
Applications
|
N/A
- With a utility knife, remove the molded tips at the groove from the One Step™ mixing head.
- Attach a One Step™ mixing nozzle to the threaded mixing head.
- Place the cartridge into the appropriate One Step™ applicator.
- Properly prepare existing membrane and/or substrate at temporary tie-in location. Surface to receive Millennium One Step™ Night Seal® must be dry, clean, and free of loose material. All loose gravel must be removed.
- Apply Millennium One Step™ Night Seal® directly to the prepared substrate. Apply a continuous bead (minimum 3/4” width) approximately 1-1/2” from where the roof covers leading edge will fall. As the sealer is applied immediately place edge of the roof cover into the wet material. Do not allow the material to skin over.
- Roll the outside edge of the roof cover to ensure positive contact with the substrate and to create a sufficient “bleed out” of sealer. Millennium One Step™ Night Seal® will expand and seal the leading edge of the roof cover.
- Un-used material can be applied at a later date by simply plugging the cartridges (with provided half moon plugs) and using a new One Step™ mixing Nozzle.
|
Equipment
|
N/A
The fast and dependable One Step™ applicators make applying Millennium One Step™ Night Seal® simple: - Battery Powered Single Bead
- Pneumatic Single Bead
- Stand Up Single Bead
- Ultra Drive Manual Applicator
- Heavy Duty Manual Applicator
|
Benefits
|
N/A
Accommodates minor surface irregularities Easy to apply Remains flexible, absorbs stresses Requires no mixing, reduces labor costs Suitable for all climates VOC free, no odors Waterproof tie-ins within minutes
|
Features
|
N/A
Elastomeric Low rise foam No temperature restrictions One Step™ technology Ready to use Solvent free Unique weatherproof “skin”
|