• Safe-T™ Ladder Extension Systems

    The Guardian Fall Protection Safe-T Ladder Extension System is designed to attach to the top of a ladder to provide a safe and easy transition from the ladder to a raised surface. It requires no tools, drilling, or bolting to install, and is one of the most effective means of improving the safety of nearly any ladder. Once installed, it provides 2 offsetting handrails that offer a point of walkthrough to step on or off the ladder. This patented piece of equipment assists workers in complying with OSHA standard 1926.1053(b), which states, “When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access.” The Safe-T Ladder Extension is incredibly simple to use, tightens onto a ladder by hand, and will never scratch or damage the ladder to which it is attached. The unit has a safety latch that prevents it from slipping off the ladder, it is specially designed with cushioned bumper pads to help protect the eave of the roof, and its handgrips help ensure maximum safety.

  • Safe-T™ Self Closing Ladder Gate

    The Safe-T Ladder Gate, designed for use in combination with the Safe-T Ladder Extension, is perfect for providing additional protection when climbing off or onto a ladder. It includes a self-closing mechanism, is both lightweight and durable, and is compliant with all applicable OSHA regulations.

  • Laddder Stability Anchor

    The Guardian Fall Protection Ladder Stability Anchor is specially designed to promote compliance with OSHA regulation 1926.1053(b)(1), which states, “…the ladder shall be secured at its top to a rigid support that will not deflect.” The Ladder Stability Anchor functions to clamp to a roof (without any penetration of the substrate) and then secure to the top rung of a ladder with either 2 or 3 foot long Velcro straps, ensuring that the ladder will not fall or move. It is composed of lightweight aluminum for superior durability, and requires no special tools to install.

  • Fall Protection Ladder Dolly

    The Guardian Fall Protection Ladder Dolly is specially designed for use by a single worker, and reduces the carrying weight of ladders by up to 90%. The dolly is compatible with nearly any ladder on the market, and attaches to and secures its load quickly and easily. It comes in a variety of configurations (see table below), and is one of the easiest ways to reduce worker fatigue and increase productivity in ladder climbing work.

  • Ladder Support

    The Guardian Fall Protection Ladder Assist is a basic and effective tool used to provide additional support for assisting workers while transitioning from a ladder to a raised working surface. It easily attaches to nearly any ladder, and features a spring-loaded design for easy, one-handed operation. Not for use in fall protection applications.

  • Two Rung Short Body Ladder Jacks

    The Guardian Fall Protection 2-Rung Ladder Jack is MIG welded and possesses a riveted construction for superior strength and durability. It is set-up over 2 consecutive ladder rungs, can be used on either side of a ladder, and is ideal for painting, siding, and repair applications. This jack is easy to both install and remove, and will even accommodate planking up to 18 inches wide when used in combination with a paired Ladder Jack, and installed and used in accordance with all applicable OSHA regulations.

  • Three Rung Long Body Ladder Jacks

    The Guardian Fall Protection 3-Rung Ladder Jack is MIG Welded and possesses a riveted construction for superior strength and durability. It is set-up over 3 consecutive ladder rungs, can be used on either side of a ladder, and is ideal for painting, siding, and repair applications. This jack is easy to both install and remove, and will even accommodate planking up to 18 inches wide when used in combination with a paired Ladder Jack, and installed and used in accordance with all applicable OSHA regulations.

  • Lock-N-Climb Ladder Stabilizers

    The Guardian Fall Protection Lock-N-Climb is ideal for providing additional stability and weight capacity in ladder climbing applications. It is compatible with nearly any extension ladder from 16 to 40 feet in height (see table below for product numbers specific to ladder height), and installs easily within a few minutes. Composed of 6061-grade aluminum, the Lock-N-Climb is both lightweight and supremely durable, and can withstand loads in excess of OSHA, ANSI A14.2, and ANSI A14.5 regulations.

  • Corner Buddy Ladder Stabilizer

    The Guardian Fall Protection Corner Buddy Ladder Stabilizer is ideal for providing additional stability for ladder work at corners, and at flat, round, or multi-dimensional construction surfaces. It easily connects to nearly any ladder, is lightweight, and is powder-coated for additional durability and weather resistance. The Corner Buddy is specially designed with rubber bumpers for added protection of the substrate to which it is placed against. If you’re in the market for a ladder stabilizer, there is nothing better available on the market than the Corner Buddy.

  • Basement Ladder Leg Leveler

    One of the most innovative ladder safety products available on the market, the Guardian Fall Protection Basemate Ladder Level System is ideal for ladder climbing applications on uneven surfaces. Easily attachable to nearly any ladder, this stabilizer equalizes uneven terrain by allowing the attached ladder to adjust in-line with the structure being climbed, all while still maintaining a solid base. It also functions to provide a wider and more stable ladder base for applications on level ground, and is compact, lightweight, and tested to support maximum loads of up to 1,200 pounds.

  • Ladder-Rung-Step1

    The Guardian Fall Protection Ladder Rung Step is specially designed to reduce worker fatigue by expanding the foot support of the ladder rung to which it is attached. Compatible with nearly any ladder, the Ladder Rung Step is made from durable and lightweight aluminum, and its patented design allows it to be installed quickly and easily without any tools. To make working from ladders easier, more efficient, and more stable, use the Ladder Rung Step.

  • Ladder Hooks with Wheel

    The Guardian Fall Protection Ladder Hook provides an ideal method of securing the top of a ladder to a rooftop. When used with a paired Ladder Hook, both hooks fit over the top two rungs of the ladder and hook over the roof edge. Then the wing nuts of both hooks are tightened, holding the ladder firmly in place. These hooks are designed to fit single or extension ladders, and are made from powder-coated steel for superior durability and strength.

our Mission

Our goal is to maximize growth in the construction industry by providing the best customer support possible. Our tools to achieve this goal are the proper selection of quality products delivered on time, with in-house service of all products supplied, and committed dedicated employees.

We measure our success by satisfied customers and employees embracing the mission.

BBB | Accreited Business